Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Lakewood?
Panel replacement in Lakewood typically costs $250 to $500 for a standard residential section, including the panel, hardware transfer, and labor. A single damaged section on a two-car door is usually the smaller end of that range. Full-width sections, upper-tier panels on a carriage-style door, or a door that needs both a panel and realignment of its track can land near the top.
That range covers the section itself and the work to hang it correctly so the door runs straight and the opener doesn’t strain. The written estimate we hand you sets the final price, and the estimate is free.
Key Takeaways
- Typical panel replacement in Lakewood runs $250 to $500 for one section.
- Most panel jobs are done the same day once we’ve matched the panel to your door.
- Matching the panel to your existing door line matters more than the price. We work with Clopay, Amarr, Wayne Dalton, Raynor, and Craftsman, so we can source a section that fits instead of improvising one.
- The written estimate is the price. No surprises added afterward.
Panel Replacement Cost Breakdown (2026)
Here’s how the numbers break down for a typical Lakewood home. These are estimated ranges, not quotes; the written estimate is what counts.
| Line Item | Typical Estimated Range |
|---|---|
| Panel replacement (standard single section) | $250 – $500 |
| Panel replacement plus track realignment | $370 – $740 combined |
| Track realignment alone | $120 – $240 |
| Cable repair (often needed after an impact) | $130 – $250 |
| Spring repair (if the door is left hanging) | $180 – $340 per spring |
| Roller replacement (worn rollers during a panel swap) | $110 – $220 |
| Full garage door repair (when damage goes beyond one panel) | $150 – $600 |
A panel replacement is rarely the whole story. When a door gets hit, the force usually travels through the section into the track and the rollers, and sometimes into the cable on that side. We check all of it before quoting so the number we give you covers the whole fix, not just the visible dent. If the track is bent at the impact point, the door won’t run true even with a new panel, and the opener will keep working harder than it should. Hanging a panel on a bent track also wears the new section’s hinges faster.
The cost climbs when the damage reaches more than one section, when the panel is a non-standard width or a discontinued style, or when the bottom section’s weather seal and bottom bracket need to come off with it. It drops when the panel is a common size we can source directly and the surrounding hardware is sound. We carry stock on the widely installed lines, which keeps the timeline short.
What Affects Panel Replacement Pricing in Lakewood
- Panel size and door width. A single-car door section is smaller and lighter than a two-car section, so the labor and material cost differ. Wider doors also mean more careful alignment on refit.
- Door line and panel availability. A panel for a Clopay or Amarr door that’s still in production is straightforward to source. A discontinued style or an off-brand import can take longer to match, and that adds to the job. We work across eight major brands, so we’ve handled most of what’s on Lakewood homes.
- Whether the track took the impact. A dented track at the impact point pushes the combined cost toward the higher end. Straightening or replacing the affected section of track adds to the ticket but saves the new panel from early wear.
- Age and condition of the rest of the door. A door that’s already got worn rollers or a stretched cable is a chance to handle both in one visit. Bundling the work keeps you from paying for a second trip later.
- Material and insulation. An insulated panel or a wood-look steel section costs more than a basic steel panel. If your door is insulated and you want to keep the thermal performance matched, that’s a factor in the quote.
- Local housing stock. Lakewood’s mid-century tract homes often have original single-car and two-car doors in standard widths, which is good news for sourcing. Newer builds and custom doors are the exception and can push the range up.
Repair or Replace: Which Makes Sense for Your Door?
If one panel is damaged and the rest of the door is sound, replace the panel. That’s the honest answer, and it’s the cheaper one. If the door is old, several sections are compromised, or the frame and hardware are worn through, a full replacement is often the better spend over time. A garage door service in Lakewood that also installs new doors can tell you which side of that line you’re on without leaning on the sale.
New door installation in Lakewood runs $700 to $2,200 depending on size, material, and insulation. That’s a very different number from a panel swap, so it’s worth knowing where you stand before you commit. We don’t push replacement when a panel fixes it, and we don’t patch a door that’s about to fail either. If you’re weighing it, a Lakewood homeowner can get a straight read on both options in one visit.
How to Save on Panel Replacement
- Get the panel matched before you buy. Chasing a section that turns out not to fit your door wastes time and money. Give us the door line and size and we’ll tell you what’s available.
- Handle related wear in the same visit. Rollers and cables that are already near the end of their life are cheaper to swap while the door is apart than on a separate call.
- Fix the track, not just the dent. A new panel on a bent track will wear out faster. Straightening the track now protects the money you just spent.
- Ask for the free estimate in writing. We put the price in writing so you can compare it against any other quote line for line. Call (866) 596-9807 to set it up.
- Don’t defer a hanging door. A door stuck open or off its track puts strain on the opener and the springs. Getting it fixed sooner usually costs less than letting it run damaged.
Can You Match My Panel to My Existing Door?
In most cases, yes. We work with eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Panels from the widely installed lines are usually available in the common widths and profiles. If your door is a discontinued style or a custom build, we’ll tell you what the options are and whether a close match is possible. We won’t claim a match we can’t back up.
Matching matters because a panel that’s slightly off in profile or color looks wrong from the street, and a panel that’s off in thickness or weight can throw the door’s balance off. Balance affects how hard the opener works. We check the door’s balance after any panel swap so the spring tension still carries the weight it should.
What Happens When You Call
You tell us what happened to the door and, if you know it, the brand. We ask a few questions about the door’s size and what’s moving and what isn’t. We book a visit, and in most cases a technician is out the same day. On arrival we look at the whole door: the damaged panel, the track, the rollers, the cables, and the springs. Then we give you a written estimate before any work starts.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If you call outside those hours, your call is booked into the next opening. We’re closed Saturday.
One visit usually covers it. Because we handle both the door and the opener, you don’t need a second company for a LiftMaster or Chamberlain opener that’s been straining against a misaligned door. If the impact knocked the opener’s travel settings off, we reset them as part of the job. That’s the difference between fixing the panel and fixing the door.
FAQs – Panel Replacement Cost
How much does panel replacement cost in Lakewood?
Panel replacement in Lakewood typically costs $250 to $500 for a standard single section, including the panel, hardware transfer, and labor. The written estimate sets the final price. Call (866) 596-9807 for a free estimate.
Is it cheaper to replace one panel or the whole door?
Replacing one panel is almost always cheaper: $250 to $500 versus $700 to $2,200 for a new door. The panel wins when the rest of the door is sound. If multiple sections, the track, and the frame are all worn, a new door can be the better long-term spend. Call (866) 596-9807 and we’ll give you an honest read on both.
Can you come out today for a damaged panel?
In most cases, yes. Same-day service is standard when you call during dispatch hours. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside those hours is booked into the next opening. Call (866) 596-9807.
Do I need to replace the track too when a panel is damaged?
Only if the track is bent at the impact point. Track realignment runs $120 to $240 on its own, and combined with a panel swap you’re looking at roughly $370 to $740. A new panel on a bent track wears out faster, so it’s worth checking. Call (866) 596-9807 for a free inspection and estimate.
Will my insurance cover a damaged garage door panel?
It depends on the cause. A panel damaged by a vehicle, a storm, or another covered event is often eligible; wear and tear usually isn’t. We can work with your insurer and provide a written estimate you can submit. The exact coverage is between you and your carrier. Call (866) 596-9807 to get the estimate started.
Get Your Panel Replacement Estimate
If a panel is dented, cracked, or hanging, we can tell you what it takes to fix it and what it costs before any work begins. We’ve served Lakewood since 2013, and we handle the door and the opener in one visit so you’re not coordinating two companies. Call (866) 596-9807 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Garage Door Service Lakewood, serving Lakewood since 2013.
Pricing reflects the Lakewood market as of 2026. Garage Door Service Lakewood offers free estimates – call (866) 596-9807.
What Our Customers Say
"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Steven Chen"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Elena Salazar"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Destiny Prince